Air Jack & Spring

Air Spring                          

We are introducing Advance Air Jack product to achieve the lifting on a plat form to many years of problem free service lift. We ensure you that every single jack is coming with highest quality.

 

Features:

• With a 2000 kg. Lifting capacity, the Advance Air Jack offers a lowered height of 140 mm and a raised height of 400 mm.
• Compact and lightweight, the Advance Air Jack provides quick up and down positioning.
• Features include an internal stabilizing cylinder for stable, solid positioning.
• Dual safety valves prevent both over-inflation and uncontrolled deflation.

Advantages:

• Lifting of vehicle will be accepted by only soft buttons
• With compact design and easily movable it can effectively reduce the intensity of labor.
• In a few seconds the vehicle can be lifted.
• Air Jacks is used without any lubricant. it is maintenance free.
• There is a safely valve built-in air jack to avoid any damages.
• It can work with minimum height of 140 mm and Maximum height is 400mm.
• While Using the device, please observe the following indications.
• Never exceed the maximum load(2 tons)
• Never inflate in excess of the maximum air pressure(7 bar)
• Only use the advance air jack of lifting purpose,once lifted, use a suitable device to prop up the vehicle.
• Use Only on flat and Hard Surfaces.
• Always keep your hands well away from the jack pad.
• Lift the car only in the areas specified by the vehicle manufacturer.
• Only use the proper accessories provide by the manufacturer and or use an adapter.

 

Don''''t use any sharp objects or any petroleum/chemical substance around jack. rupturing/busting of air spring can cause failure of jack and leading possibly serious inquiry of operating personal.

 

• Production Capacity: 100
• Delivery Time: 1 week
• Packaging Details: BOX

Air Springs are the ideal choice for applications requiring short stroke, high thrust single acting actuators. Manufactured from fabric reinforced synthetic rubber in one, two or three convolutions according to stroke and model. They incorporate no reciprocating metal parts and so provide virtually frictionless thrust compared with conventional pneumatic cylinders. All models are single acting only. The return stroke is provided in part by the natural spring action of the bellows but more usually by the load itself. The simplicity of construction provides an extremely long, virtually maintenance-free service life even under arduous conditions. Air Springs are suitable for vibration applications i.e. device feeders at high frequency. Versions Air bellows are available with aluminum or steel end plates and support rings depending upon type.

Air Bellow Spring are the ideal choice for applications requiring short stroke, high thrust single acting actuators.

Manufactured from fabric reinforced synthetic rubber in one, two or three convolutions according to stroke and model. They incorporate no reciprocating metal parts and so pro wide virtually frictionless thrust compared with conventional pneumatic cylinders.

All models are single acting only. The return stroke is provided in part by the natural spring action of the bellows but more usually by the load itself. The simplicity of construction provides an extremely long, virtually maintenance-free service life even under arduous conditions.

Air bellows are suitable for vibration applications i.e. device feeders at high frequency.

Operation of airspring

Due to their flexible construction the mounting of Air Bellows is less critical than with conventional pneumatic cylinders, which normally require rigid fixing and guidance and provide only one axis within a limit of 15degree between faces. Additionally the axial location of the end plates may be off set by up to 10 mm.

When pressurised Air Bellows will follow the line of leased resistance. Accordingly care must be taken with the mounting geometry in angled applications.

When depressurized Air Bellows will fit in to surprisingly small spaces, especially useful for clamping or moving awkwardly shaped or very heavy loads.

In operation it is recommended that the unit is not allowed to "bottom out" or achieve its maximum height. Various mechanical devices may be employed to achieve this.

• Production Capacity: 10
• Delivery Time: 2 WEEKS
• Packaging Details: IN CORRUGATED BOX.